1. Who Orders Custom Performance?
✔ Steel mills – slow torque, 24/7 heat
✔ Arctic ports – -50 °C cold-start package
✔ Desert logistics – +60 °C cooling upgrade
✔ Mining – 25 % grade, dust-sealed cabin
✔ 3PL fleets – one parts list, multiple specs
2. Core Advantages
2.1 600 mm Load-Center Optimisation
-
Heel thickness 80 mm (vs 50 mm standard)
-
Reduced axle loading → longer tire life
-
Full 15 t rating from ground to top lift
2.2 Customised Performance Modes
-
ECO: 0–12 km/h, -18 % fuel
-
STD: 0–20 km/h, balanced cycles
-
HI-SPD: 0–28 km/h, port dash mode
-
Remap at dealer in 15 min (no parts)
3.3 Durability Upgrades
-
240 µm epoxy paint, salt-spray 1,000 h
-
Stainless steel hoses, -50 °C seals
-
Double air-filter, cyclone pre-cleaner
-
Automatic grease lines to all pins
-
4,000 h mast bushing life
4.4 Climate Customisation
-
Arctic: fuel heater, battery warmer, cabin HVAC
-
Desert: reverse-fan, high-capacity radiator
-
Tropical: corrosion-proof roof, UV-stable glass
3. Safety & Comfort
-
ROPS/FOPS cabin 74 dB(A)
-
Suspension seat with 3-point belt
-
360° LED + blue safety spot
-
Rear-view camera + radar option
-
Hill-hold & neutral-start interlock
Technical Parameters:
| Parameters: |
Vehicle configuration |
|
FD150 |
| Performance |
Rated load |
|
15000 |
| Load center |
|
600 |
| Mast tilt angle (front/rear) |
º |
6/12 |
| Overall dimensions |
Length |
mm |
7200 |
| Width |
mm |
2550 |
| Height |
mm |
3460 |
| Mast lifting height |
mm |
3000 |
| Fork size (L*W*H) |
mm |
1800X200X90 |
| Min. turning radius |
mm |
5050 |
| Max. travel speed (with load) |
Km/h |
22 |
| Lifting speed (with load) |
mm/s |
240 |
| Gradeability (with load) |
% |
20 |
| Weight |
Kg |
17000 |
| Tyre |
Front |
|
4X12.00-24/20PR |
| Rear |
|
2X12.00-20/18PR |
| Wheel tread |
Front |
mm |
1850 |
| Rear |
mm |
2130 |
| Wheelbase |
mm |
3600 |
| Min. ground clearance |
mm |
270 |
| Engine |
Model |
|
YC6J175-T302 |
| Rated power |
KW |
129 |
| Max. torque |
N.m |
710 |
|
